Planet WGS-4215 Series User Manual page 303

4.13.4.6 Rate Limit
After enabling DHCP snooping, the switch will monitor all the DHCP messages and implement software transmission. The
DHCP Rate Limit Setting and Config screens in
The page includes the following fields:
Object
• Port
• State
• Rate Limit (pps)
Buttons
: Click to apply changes
The page includes the following fields:
Object
• Port
• Rate Limit (pps)
Figure 4-13-43
Figure 4-13-43 DHCP Rate Limit Setting Page Screenshot
Description
Select port from this drop-down list
Set default or user-define
Configure the rate limit for the port policer. The default value is "unlimited". Valid
values are in the range 1 to 300.
Figure 4-13-44 DHCP Rate Limit Setting Page Screenshot
Description
The switch port number of the logical port
Display the current rate limit
User's Manual of WGS Managed Series
& Figure 4-13-44 appear.
303