Planet WGS-4215 Series User Manual page 48

Industrial wall-mount managed gigabit ethernet switch

Table of Contents

User's Manual of WGS Managed Series

Magnet Installation of WGS-4215-16P2S

There are six holes on the unit, using six round magnets to install. Please refer to the following.

Step 1: Turn the switch to the back and place the six round magnets with holes on the back of the switch where the holes are.

Step 2: Turn the switch to front and push the plastic bolts into the holes to secure the magnets.

Step 3: One last round magnet should be fixed in the middle of the switch.

Step 4:Now the you can place the switch on to any magnetic surface.