Planet WGS-4215 Series User Manual page 352

• Current Used [mA]
• Power Used [W]
• Power Allocation
Buttons
: Click to apply changes.
4.15.4 PoE Status
This section provide per port PoE status and the
The Power Used shows how much current the PD currently is using.
The Power Used shows how much power the PD currently is using.
It can limit the port PoE supply watts. Per port maximum value must be less than
30.8/36 watts. Total port values must be less than the Power Reservation value.
Once power overload is detected, the port will auto shut down and keep in
detection mode until PD's power consumption is lower than the power limit value.
screen in
Figure 4-15-5 Power over Ethernet Status Screenshot
352
User's Manual of WGS Managed Series
Figure 4-15-5 appears.