Netopia 3386-ENT Getting Started Manual page 20

Cable/dsl router

Hide thumbs Also See for 3386-ENT:

Table of Contents

4-6 Getting Started Guide

In the TCP/IP window or in the MacTCP/More window, select or type information into the ﬁelds as shown in

the following table.

Connect via:

Conﬁgure:

IP Address:

Subnet mask:

Router or Gateway address:

Name server address:

Implicit Search Path:

Starting domain name:

Close the TCP/IP or MacTCP control panel and save the settings.

If you are using MacTCP, you must restart the computer. If you are using Open Transport, you do not need

to restart.

Note: You can use these instructions to conﬁgure other computers on your network to accept IP addresses

served by the Netopia 3386-ENT.

You can also use these instructions to conﬁgure other computers on your network with manual or static IP

addresses. Be sure each computer on your network has its own IP address.

More information about conﬁguring your Macintosh computer for TCP/IP connectivity through a Netopia

3386-ENT can be found in Technote NIR_026, "Open Transport and Netopia Routers," located on the Netopia

Web site.

Option:

Ethernet

Manually

192.168.1.2

255.255.255.0

192.168.1.1

Enter the primary and secondary name server

addresses given to you by your ISP

Enter your domain name; if you do not have a

domain name, enter the domain name of your ISP

Select/Type:

Table of Contents

Show Quick Links

Table of Contents