Connection Considerations - Garmin ECHOMAP UHD2 6 SV Installation Instructions Manual

Connection Considerations

Connector View
POWER Power cable port
NMEA 2000 NMEA 2000
SONAR Transducer cable port
Garmin Marine Network cable port for connection to compatible Panoptix
devices
NETWORK
NOTE: This device is not compatible with some Garmin Marine Network devices such as
GPSMAP , GSD
®
To prevent corrosion of the metal contacts, cover unused connectors with weather caps.
Connecting the Power Cable
When connecting the power cable, do not remove the in-line fuse holder. To prevent the possibility of injury or
product damage caused by fire or overheating, the appropriate fuse must be in place as indicated in the product
specifications. In addition, connecting the power cable without the appropriate fuse in place voids the product
warranty.
1 Route the power cable to the power source and to the device.
2 Connect the red wire to the positive (+) battery terminal, and connect the black wire to the negative (-) battery
terminal.
3 Insert the power-cable connector into the POWER port on the back of the cradle, pushing firmly.
4 Turn the locking ring clockwise to secure the cable to the device.
cable port
®
, and radar devices.
™
NOTICE
WARNING
, GCV , and ECHOMAP
™ ™
7