Moving The Network Card To A Different Slot - NETGEAR GA622T Reference Manual

6. Click Finish to complete the installation.

Moving the Network Card to a Different Slot

Windows 2000 automatically detects the installation and removal of hardware.
To move a GA622T Copper Gigabit Ethernet Card to a different slot in the same
system, you need to do the following:
1. Shut down the system and remove the card from the PCI slot.
2. Install the card in its new PCI slot (see "Installing Your Gigabit Ethernet Card"
on page 2-7).
3. When the system is powered on, reinstall the driver software (see "Installing the
Driver Software" on page 5-1).
Windows 2000 driver software 5-6