Requirements; Table 2-1. Software And Hardware Requirements - NETGEAR GA622T Reference Manual

Requirements

Before installing the GA622T Copper Gigabit Ethernet Card, verify that your system
meets the operating system and hardware requirements outlined in Table 2-1.

Table 2-1. Software and Hardware Requirements

System Requirements
Windows 95OSR2
Hardware A Pentium-based workstation that meets Windows 95OSR2 software requirements
One open 32-bit or 64-bit PCI slot
Operating System Windows 95OSR2
Software GA622T Copper Gigabit Ethernet Card driver software, version 1.0 (or higher)
for Windows, which is included on the GA622T Copper Gigabit Ethernet Card
(loaded during
driver installation) Driver and Documentation CD in the \Win95 directory.The necessary files are:
• GA622nd4.sys (network device driver file)
• Netga622.inf (information used by installation program)
Windows 98/98SE
Hardware A Pentium-based workstation that meets Windows 98/98SE software requirements
One open 32-bit or 64-bit PCI slot
Operating System Windows 98, Windows 98SE
Software GA622T Copper Gigabit Ethernet Card driver software, version 1.0 (or higher)
for Windows, which is included on the GA622T Copper Gigabit Ethernet Card
(loaded during
driver installation) Driver and Documentation CD in the \Win98 directory.The necessary files are:
• GA622nd5.sys (network device driver file)
• Netga622.inf (information used by installation program)
Windows NT
Hardware A Pentium-based workstation or server that meets Windows NT 4.0
software requirements
One open 32-bit or 64-bit PCI slot
Minimum 64 MB memory
hardware installation 2-2