Windows Nt Driver Software; Installing The Driver Software - NETGEAR GA622T Reference Manual

Copper gigabit ethernet card

Hide thumbs Also See for GA622T:

Table of Contents

CHAPTER 4: WINDOWS NT DRIVER SOFTWARE

This chapter provides information about the Microsoft Windows NT driver software.

This chapter also gives directions for performing the following procedures:

• Updating or reinstalling the driver software

• Moving the network card and removing the driver software

Installing the Driver Software

Your GA622T Copper Gigabit Ethernet Card must be physically installed in the

server before installing the software driver. If you are installing more than one

GA622T Copper Gigabit Ethernet Card, you must perform the following procedure

for each card.

To install the driver software if you are operating in a Windows NT environment:

1. Start your Windows NT system and log in.

You must have Network Administrator privileges to install the driver software.

2. On the Windows taskbar, click the Start button, point to Settings, and then click

Control Panel.

The Control Panel window opens, displaying a group of icons including the

Network icon.

Windows NT driver software

4-1

Table of Contents