NETGEAR GA622T Reference Manual page 44

8. Press the Enter key to select the listed driver.
9. At the "Do you want to copy driver GA622.LAN?" prompt, select Yes.
The "Board GA622_1 (Driver GA622) Actions" dialog box opens.
10. Select the "Save parameters and load driver" option.
The Network number to bind dialog box opens.
11. Press Enter to accept random network number or Esc to not accept binding.
The system examines the network for net number conflicts.
12. The system will prompt you for the network number to bind the adapter card for
various frame types. Repeat this step until the system has prompted you for all
four frame types.
After examining the net number conflicts, the "Do you want to select an addition-
al Network driver?" dialog box opens.
13. Specify whether you have an additional adapter to install.
The Selected Network Drivers windows opens with message "GA622 (currently
loaded). "
The GA622T software driver installation is complete.
Note: The AUTOEXEC.NCF is automatically modified after the above process is
complete. Whenever the system is restarted in the future, the GA622T drivers
are automatically loaded.
NetWare driver software 6-4