Factory Default Settings - NETGEAR WNDR3800 - N600 WIRELESS DUAL BAND GIGABIT ROUTER-Premium Edition User Manual

N600 Wireless Dual Band Gigabit Router Premium Edition WNDR3800

Factory Default Settings

You can restore the factory default configuration settings to reset the router's user name to
admin, the password to password, and the IP address to www.routerlogin.net. This
procedure erases your current configuration, including your wireless security settings, and
restores the factory defaults. When you log in after resetting, the Smart Wizard configuration
assistant prompts you to configure these settings.

To restore the factory default settings:
Use a sharp object such as a pen or a paper clip to press and hold the Restore Factory
1.
Settings button, located on the bottom of the router, for over 2 seconds until the Power
LED turns to blinking amber.
Release the Restore Factory Settings button, and wait for the router to reboot.
2.
The factory default settings are restored so that you can access the router from your Web
browser using the factory defaults.
Table 4. WNDR3800 Router Default Configuration Settings
Feature
Router login URL
User name (case-sensitive)
printed on product label
Password (case-sensitive) printed
on product label
Internet MAC address
MTU size
Router LAN IP address printed on
product label (gateway IP address)
Router subnet
DHCP server
DHCP range
Time zone
Time zone daylight savings time
Allow a registrar to configure this
router
Wireless communication
Wireless network names (SSIDs)
Security
Default setting
www.routerlogin.net or www.routerlogin.com
admin
password
Use default hardware address
1500
192.168.1.1
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
Pacific time
Disabled
Enabled
Enabled
• The unique default network name is printed on product label
• 2.4 GHz b/g/n guest network: NETGEAR-Guest
• 5 GHz a/n guest network: NETGEAR-5G-Guest
The unique default password is printed on product label.
Supplemental Information
121