Cannot Access The Internet - NETGEAR WNDR3800 - N600 WIRELESS DUAL BAND GIGABIT ROUTER-Premium Edition User Manual

N600 wireless dual band gigabit router premium edition
Hide thumbs Also See for WNDR3800 - N600 WIRELESS DUAL BAND GIGABIT ROUTER-Premium Edition:
Table of Contents

Advertisement

N600 Wireless Dual Band Gigabit Router Premium Edition WNDR3800

Cannot Access the Internet

If you can access your router but you are unable to access the Internet, first determine
whether the router can obtain an IP address from your Internet service provider (ISP). Unless
your ISP provides a fixed IP address, your router must request an IP address from the ISP.
You can determine whether the request was successful using the Router Status screen.
To check the WAN IP address:
Start your browser, and select an external site such as http://www.netgear.com.
1.
Access the router's configuration at http://www.routerlogin.net.
2.
Select Advanced > Administration > Router Status.
3.
Check that an IP address is shown for the Internet port. If 0.0.0.0 is shown, your router has
4.
not obtained an IP address from your ISP.
If your router cannot obtain an IP address from the ISP, you might need to force your cable or
DSL modem to recognize your new router by restarting your network.
If your router is still unable to obtain an IP address from the ISP, the problem might be one of
the following:
Your Internet service provider (ISP) might require a login program.
Ask your ISP whether they require PPP over Ethernet (PPPoE) or some other type of
login.
If your ISP requires a login, the login name and password might be set incorrectly.
Your ISP might check for your computer's host name.
Assign the computer host name of your ISP account as the account name in the Basic
Settings screen.
Your ISP allows only one Ethernet MAC address to connect to Internet and might check
for your computer's MAC address. In this case, do one of the following:
Inform your ISP that you have bought a new network device, and ask them to use the
-
router's MAC address.
Configure your router to clone your computer's MAC address.
-
If your router can obtain an IP address, but your computer is unable to load any Web pages
from the Internet:
Your computer might not recognize any DNS server addresses.
A DNS server is a host on the Internet that translates Internet names (such as www
addresses) to numeric IP addresses. Typically, your ISP provides the addresses of one or
two DNS servers for your use. If you entered a DNS address during the router's
configuration, reboot your computer, and verify the DNS address.You can configure your
computer manually with DNS addresses, as explained in your operating system
documentation.
Your computer might not have the router configured as its TCP/IP gateway.
If your computer obtains its information from the router by DHCP, reboot the computer,
and verify the gateway address.
Troubleshooting
117

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wndr3800

Table of Contents