Set Up A Video Network; Guest Network Wireless Security Options - NETGEAR WNDR3800 - N600 WIRELESS DUAL BAND GIGABIT ROUTER-Premium Edition User Manual

N600 Wireless Dual Band Gigabit Router Premium Edition WNDR3800
Select a security option from the list. The security options are described in
5.
Wireless Security Options
Click Apply to save your selections.
6.

Set Up a Video Network

To prevent packet drops or jitter when streaming high-quality video, NETGEAR recommends
that you create a separate Wi-Fi network on the 5 GHz radio band of your router, and connect
all of your media-streaming devices, or PCs that you use to stream video, to this Wi-Fi
network.

To set up a video network:
Scroll down to the Wireless Settings (5GHz a/n) section, and type a new Guest Wireless
1.
Network Name (SSID). This will be your new Wi-Fi network. For example, you could call
it My Video Wi-Fi.
Select the Enable Video Mode radio button.
2.
Click Apply.
3.
Connect your media-streaming devices, or PCs that you use to stream video, to this
4.
separate Wi-Fi network on your router.

Guest Network Wireless Security Options

A security option is the type of security protocol applied to your wireless network. The
security protocol in force encrypts data transmissions and ensures that only trusted devices
receive authorization to connect to your network. Wi-Fi Protected Access (WPA) has several
options including pre-shared key (PSK) encryption and 802.1x encryption for enterprises.
This section presents an overview of the security options and provides guidance on when to
use which option. Note that it is also possible to set up a guest network without wireless
security. NETGEAR does not recommend this.
WPA Encryption
WPA encryption is built into all hardware that has the Wi-Fi-certified seal. This seal means
the product is authorized by the Wi-Fi Alliance (http://www.wi-fi.org/) because it complies with
the worldwide single standard for high-speed wireless local area networking.
WPA uses a passphrase to perform authentication and generate the initial data encryption
keys. Then it dynamically varies the encryption key. WPA-PSK uses Temporal Key Integrity
Protocol (TKIP) data encryption, implements most of the IEEE 802.11i standard, and is
designed to work with all wireless network interface cards, but not all wireless access points.
It is superseded by WPA2-PSK.
WPA2-PSK is stronger than WPA-PSK. It is advertised to be theoretically indecipherable due
to the greater degree of randomness in encryption keys that it generates. WPA2-PSK gets
higher speed because it is usually implemented through hardware, while WPA-PSK is usually
on page 30.
Genie Basic Settings
30
Guest Network