Troubleshooting The Web Configuration Interface - NETGEAR RangeMax DG834PN Reference Manual

Reference Manual for the DG834PN RangeMax
— When connecting the router's Internet ADSL port, use the cable that was supplied with the
DG834PN.

Troubleshooting the Web Configuration Interface

If you are unable to access the router's Web Configuration interface from a computer on your local
network, check the following:
• If you are using an Ethernet-connected computer, check the Ethernet connection between the
computer and the router as described in the previous section.
• Make sure your computer's IP address is on the same subnet as the router. If you are using the
recommended addressing scheme, your computer's address should be in the range of
192.168.0.2 to 192.168.0.254. Follow the instructions in
Access:" in Appendix B
Note: If your computer's IP address is shown as 169.254.x.x, recent versions of
Windows and MacOS will generate and assign an IP address if the computer
cannot reach a DHCP server. These auto-generated addresses are in the range
of 169.254.x.x. If your IP address is in this range, check the connection from
the computer to the router and reboot your computer.
• If your router's IP address was changed and you do not know the current IP address, clear the
router's configuration to factory defaults. This will set the router's IP address to 192.168.0.1.
This procedure is explained in
• Make sure your browser has Java, JavaScript, or ActiveX enabled. If you are using Internet
Explorer, click Refresh to be sure the Java applet is loaded.
• Try quitting the browser and launching it again.
• Make sure you are using the correct login information. The factory default login name is
admin and the password is password. Make sure that CAPS LOCK is off when entering this
information.
If the router does not save changes you have made in the Web Configuration Interface, check the
following:
• When entering configuration settings, be sure to click the APPLY button before moving to
another menu or tab, or your changes are lost.
• Click the Refresh or Reload button in the Web browser. The changes may have occurred, but
the Web browser may be caching the old configuration.
Troubleshooting
to configure your computer.
"Using the Reset button" on page
v1.0, November 2005
TM
ADSL Modem Wireless Router
"Preparing a Computer for Network
7-9.
7-3