NETGEAR RangeMax DG834PN Reference Manual page 35

Reference Manual for the DG834PN RangeMax
2. From the Wireless Settings menu, Wireless Station Access List section, click the Setup Access
List button to display the list, shown below:
Figure 3-4
3. Select the Turn Access Control On check box to enable restricting wireless computers by their
MAC addresses.
4. If the wireless station is currently connected to the network, you can select it from the
Available Wireless Stations list. Click Add to add the station to the Trusted Wireless Stations
list.
5. If the wireless station is not currently connected, you can enter its address manually. Enter the
MAC address of the authorized computer. The MAC address is usually printed on the wireless
card, or it may appear in the ADSL modem wireless router's DHCP table. The MAC address
will be 12 hexadecimal digits.
Wireless Configuration
v1.0, November 2005
TM
ADSL Modem Wireless Router
3-11