The Router's Front Panel - NETGEAR RangeMax DG834PN Reference Manual

Reference Manual for the DG834PN RangeMax

The Router's Front Panel

The DG834PN 108 Mbps RangeMax
contains status LEDs.
1
Figure 2-1
You can use the LEDs to verify various conditions.
front panel of the router.
Table 2-1. LED Descriptions
Item Function Activity
1 Power On
Off
2 Test On
Off
3 PPP Link On -- Green
Off
4 Internet Blink -- Amber
On -- Green
Blink -- Green
5 Wireless On
Off
6 LAN On (Green)
Blink (Green)
On (Amber)
Blink (Amber)
Off
7 Dome
On (Blue)
Off
2-8
ADSL Modem Wireless Router front panel shown below
TM
2 3 4
Description
Power is supplied to the router.
Power is not supplied to the router.
The system is initializing.
The system is ready and running.
PPP link is active or has reached idle timeout.
No PPP link, modem is off, or no ADSL connection
Indicates ADSL training.
The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
Indicates that the Wireless port is initialized.
The Wireless Access Point is turned off.
The Local port has detected a link with a 100 Mbps device.
Data is being transmitted or received at 100 Mbps.
The Local port has detected a link with a 10 Mbps device.
Data is being transmitted or received at 10 Mbps.
No link is detected on this port.
There are six LEDs in the dome, one for each antenna.
Antenna element associated with LED is on.
Antenna off or LEDs programmatically switched off.
v1.0, November 2005
TM
ADSL Modem Wireless Router
5
6
Table 2-1 lists and describes each LED on the
7
Introduction