Type Asc - Setting The Codec List For Dmc Connections, Rtp Packet Size, Voice Activity Detection And T.38 Fax - Siemens HG 3500 V4 Service Manual

Hipath 4000 v5 gateways
Table of Contents

Advertisement

gateways_12_hg3575v4.fm
HiPath Gateway HG 3575 V4 - Changing Parameters with AMO STMIB

TYPE ASC - Setting the Codec List for DMC Connections, RTP Packet Size, Voice Activity Detection and T.38 Fax

12.5 TYPE ASC - Setting the Codec List for DMC Connections, RTP Packet
Size, Voice Activity Detection and T.38 Fax
110
See also
Chapter 15, "Codec
Codec list
With NCUI2, direct media connections from IP phones, trunking gateways or HG
3500/75 gateways associated with networked HiPath 4000 systems can be
terminated on the board. Unlike for IPDA, the codec type for DMC connections is
not selected using classmarks but rather on the basis of a codec list which
provides the relevant partners with information about the codec types supported
and preferred.
HG 3575 supports two codec types: G.711 and G.729
The sequence in which the codec types are named defines the preference. The
type named first is preferred.
In the example, NCUI2 supports G.711 and G.729 but G.729 is preferred. The
audio sample size for G.711 and G.729A is set to 60 ms.
T.38 Fax
The parameter T38FAX cannot be used at the moment because this feature is
not yet supported on NCUI.
The dafault value has been set to NO and cannot be changed to YES. The AMO
shows up a
warning
when trying to change the value to YES.
warning
H35: THE T38FAX IS NOT YET SUPPORTED ON NCUI BOARDS,
THE DEFAULT VALUE HAS BEEN SET INTERNALLY.
Configuration Management --> System Data --> IPDA --> IPDA Access
Point
Click Search and select the access point.
Select G729, G711 on the General tab under DMC Codec List in the
Direct Media Connection section and Save.
CHANGE-
STMIB:MTYPE=NCUI2,LTU=99,TYPE=ASC,PRIO=PRIO1,CODEC=G72
9,RTP=60;
CHANGE-
STMIB:MTYPE=NCUI2,LTU=99,TYPE=ASC,PRIO=PRIO2,CODEC=G71
1,RTP=60;
This change is started directly on the access point and is effective immediately
without an interruption in operation.
HiPath 4000 V5, IP Solutions - HG 3500 & HG 3575, Service Documentation
Settings".
A31003-H3150-S104-2-7620, 03/2009

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hg 3575 v4

Table of Contents