Table of Contents
Advertisement
1
Installation
To install the Needle Sleeve Assembly into the Nanospray Ion
Source
1 Start the video capture software so that the camera display is shown on the
2 Position the
Figure 23
3 Slowly insert the
32
computer monitor.
Nanospray Slide Assembly
Source) at the midway point of its travel length. You do this step to make
sure that the
Needle Sleeve Assembly
Counter Electrode
when the needle is inserted into the source.
Before inserting that the
Slide Assembly
This action prevents damage to the needle when it is inserted into the source
Needle Sleeve Assembly
Assembly
while you view the video capture screen. Make sure that the
needle appears at the top of the screen roughly midway between the
Counter Electrode
and the spray shield.
(on top of the Nanospray Ion
does not hit the spray shield or the
Needle Sleeve
mid-way between the spray shield and the
into the
Assembly, position the
Counter
Nanospray Slide
Nanospray Ion Source User Guide
Nanospray
Electrode.
Advertisement
Table of Contents
