Spanning-Tree Max-Age; Spanning-Tree Max-Hops - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
5.1.8.1 no spanning-tree hello-time
This command sets the admin Hello Time parameter for the common and internal
spanning tree to the default value.
Format
Mode

5.1.9 spanning-tree max-age

This command sets the Bridge Max Age parameter to a new value for the common and
internal spanning tree. The max-age value is in seconds within a range of 6 to 40, with the
value being less than or equal to 2 x (Bridge Forward Delay - 1).
Default
Format
Mode
5.1.9.1 no spanning-tree max-age
This command sets the Bridge Max Age parameter for the common and internal spanning
tree to the default value of 20.
Format
Mode

5.1.10 spanning-tree max-hops

This command sets the MSTP Max Hops parameter to a new value for the common and
internal spanning tree. The max-hops value is a range from 1 to 127.
Default
Format
Mode
5.1.10.1 no spanning-tree max-hops
This command sets the Bridge Max Hops parameter for the common and internal spanning
tree to the default value.
Format
Mode
Spanning Tree Protocol Commands
no spanning-tree hello-time
Interface Config
20
spanning-tree max-age <6-40>
Global Config
no spanning-tree max-age
Global Config
20
spanning-tree max-hops <1-127>
Global Config
no spanning-tree max-hops
Global Config
v1.0, March 2006
5-5