Korg Pa5X Performance Manual page 405

At this point, you can start recording in one of two ways:
2
If the SYNCHRO START
>
sequence, and keep it held. Then press the
recording.
If the SYNCHRO START
>
you play a chord.
While recording, the
3
Check the recognized chords appearing in the display.
Stop recording
▪
Stop recording in one of two ways:
1
Press the PLAY/STOP (
>
The CHORD > SEQUENCE
Chord Sequence available.
Touch the Record ( )
>
will continue to play. The
blue, and the recorded Chord Sequence will play in loop.
At this point, you can use the
2
quence on or off.
Check if the recorded chords are correct.
3
Save the Chord Sequence
▪
The Chord Sequence will remain in memory until you record a new Chord
Sequence, choose a different Style or SongBook Entry, or turn the instrument off.
If the sequence is locked, it will not change when choosing a different Style or
SongBook Entry.
To avoid losing it, save it, as described in the following pages.
indicator is turned off, play the first chord of the
indicator is turned on, recording will start as soon as
Record ( ) button in the display will be steadily red.
) button on the control panel. The Style will stop.
indicator will become white to show that there is a
button in the display. The button will go dark. The Style
CHORD > SEQUENCE
CHORDS > SEQUENCE
RecordingChordSequences |395
PLAY/STOP (
indicator will become orange or
button to turn the se-
) button to start