Sending MIDI messages when selecting
SongBook Entries
When the special Control channel is assigned to one of the MIDI OUT channels,
MIDI messages are sent on this channel when choosing a SongBook Entry. The
messages sent when selecting a SongBook Entry are the following (as seen in the
previous section):
An initialization string, made of the NRPN Control Change messages #99
>
(MSB, with value 2) and #98 (LSB, with value 64) in fast succession.
A selection string, made of the two Control Change messages CC#06 (Data
>
Entry MSB) for the thousands and hundreds, and CC#38 (Data Entry LSB) for the
tens and units. The range of the Data Entry controls, in this case, is 0~99 (instead
of the typical 0~127).
UsingtheSongBookwithatabletorpersonalcomputer |291