384| LineAudioInputs
Adjusting the line channel volume
The line input can be quickly turned on or off, and its volume in the mix adjusted,
right from the control panel or from the main page.
Be sure the
Line
1
Be sure the selected
2
Use
SLIDER #5 (Line)
3
As an alternative, use the
pane (with the
Main
Start a Style or a Song to balance the audio input against the Sounds.
4
Check that the audio is well balanced and is not distorting. If needed, lower
5
the output level of the Line source.
channel is turned on.
CONTROL
mode is MAIN.
to adjust the Line channel volume.
Line Volume
view mode selected).
control you can find in the
Home > Control