Importing your own certificate
When you import your own certificate, enter the password, if any.
Figure 30 Importing your own certificate
Importing your certificate chain
Figure 31 Importing your certificate chain
Configuring the PSTN gateway
The HP MSR SBM runs on a HP MSR OAP Module. The PSTN gateway
working with the HP MSR SBM can be a voice card on the same MSR or
a voice card on another MSR. You can configure the gateway through the
page shown in
after the installation.
Enter the FQDN or IP address, user name, and password information as
shown in the following figure, and click PSTN Setup. A pop-up window
appears. For how to configure the gateway in the pop-up window, see
gateway-related documents.
If the information you input is correct, it will be saved to the HP MSR SBM,
and you do not need to enter it again on the dashboard.
Figure
32, or you can configure it on the dashboard page
32