Figure 10 Configuring IP settings
If you need to modify the current system configuration, manually
•
configure the IP address or obtain the IP address by using DHCP.
The basic manual configurations include three required configuration
items: IPv4 address, subnet mask, and preferred DNS server.
After the configuration, click Apply.
NOTE:
Before applying the configuration, you can click Discard Changes to
•
drop your configuration.
Put the cursor on the question mark
•
CAUTION:
If you specify a new IP address, you will lose the current connection to the
HP MSR SBM. In this case, use the new IP address to re-connect to the HP
MSR SBM.
to get help.
17