Figure 5-5. Static Route Example - NETGEAR RO318 Reference Manual

In this case you must define a static route, telling your router that 134.177.0.0 should be accessed
through the ISDN router at 192.168.100. The static route would look like
Figure 5-5. Static Route Example
In this example:
• The Destination IP Address and IP Subnet Mask fields specify that this static route applies to
all 134.177.x.x addresses.
• The Gateway IP Address fields specifies that all traffic for these addresses should be
forwarded to the ISDN router at 192.168.0.100.
• A Metric value of either 1 or 2 will work.
• Private is selected only as a precautionary security measure in case RIP is activated.
Advanced Configuration of the Router
Reference Guide for the Model RO318 Cable/DSL Security Router
Figure 5-5.
5-11