Dhcp Table; Software Upgrade; Figure 6-3. Dhcp Table - NETGEAR RO318 Reference Manual

Reference Guide for the Model RO318 Cable/DSL Security Router

DHCP Table

The DHCP Table shows all IP address assignments that have been made by the router's DHCP
server. From the Main Menu of the browser interface, click on Maintenance, then select DHCP
Table to view the table, shown in
Figure 6-3. DHCP Table
For each PC client, the table shows the IP address, Ethernet MAC address, and NetBIOS Host
Name. Note that if the router is rebooted, the table data is lost until each PC renews its DHCP
lease.

Software Upgrade

The routing software of the Model RO318 router is stored in FLASH memory, and can be
upgraded as new software is released by NETGEAR. Upgrade files can be downloaded from
Netgear's website. If the upgrade file is compressed (.ZIP file), you must first extract the binary
(.BIN) file before sending it to the router. The upgrade file can be sent to the router using your
browser.
Note: The Web browser used to upload new firmware into the Model RO318 router must support
HTTP uploads. NETGEAR recommends using Netscape Navigator 3.0 or above.
To reach the Upgrade menu, click Maintenance from the navigation bar on the left, and then click
the Upgrade heading. To upload new firmware:
Download and unzip the new software file from NETGEAR.
1.
In the Software Upgrade menu, click the Browse button and browse to the location of the
2.
binary (.BIN) upgrade file
Click Upload.
3.
6-4
Figure 6-3
Maintenance