The Router's Front Panel; Figure 2-1. Ro318 Front Panel - NETGEAR RO318 Reference Manual

The Router's Front Panel

The front panel of the Model RO318 router
Figure 2-1. RO318 Front Panel
You can use some of the LEDs to verify connections.
the front panel of the Model RO318 router. These LEDs are green when lit.
Table 2-1. LED Descriptions
Label
PWR (Power)
TEST
WAN
LNK
ACT (Activity)
LAN
LNK/ACT
(Link/Activity)
100 (100 Mbps)
Setting Up the Hardware
Reference Guide for the Model RO318 Cable/DSL Security Router
Activity Description
On Power is supplied to the router.
Off Power is not supplied to the router.
On The system is not ready or has failed to start up.
Off The system is ready and running.
Blinking The system is initializing.
On The WAN port has detected a link with an attached device.
Blinking Data is being transmitted or received by the WAN port.
On The LAN port has detected a link with an attached device.
Blinking Data is being tranmitted or received by the LAN port.
On The LAN is operating at 100 Mbps.
Off The LAN is operating at 10 Mbps.
(Figure 2-1) contains status LEDs.
Table 2-1 lists and describes each LED on
2-3