Rvm Variant Sonar Specification; Sonar Channels; Sonar Range; Traditional Sonar Range - Raymarine AXIOM 2 PRO Installation Instructions Manual

Specification
SBAS compatibility:
Signal Acquisition:

23.7 RVM variant sonar specification

Sonar channels

Your product supports the following sonar channels:
RV / RVM transducer connection
CHIRP sonar channels
3D Vision (RealVision™)
SideVision™
Sonar (CPT-S transducer)
1 kW transducer connection
CHIRP / traditional sonar channels
High CHIRP
Low CHIRP
Conical sonar
High frequency

Sonar range

The sonar range is the effective depth or distance that the transducer can
operate to, in optimum weather conditions.
The following ranges apply to RealVision™ Max 3D sonar channels:
Axiom 2 Pro 16 technical specification
• EGNOS
• GAGAN
• MSAS
• QZSS
• WAAS
Automatic
DownVision™
High CHIRP
Medium CHIRP
Low frequency
Medium frequency
Note:
The listed sonar channel ranges are indicative only, and are subject to
change depending upon the connected transducer.
Sonar channel
CHIRP sonar:
DownVision™:
SideVision™:
RealVision™ Max 3D:

Traditional sonar range

The following ranges apply to Traditional sonar channels:
Sonar channel
Traditional sonar:

23.8 S variant sonar specification

The sonar range is the effective depth or distance that the transducer can
operate to, in optimum weather conditions.
CHIRP sonar channel
100 W Sonar (conical beam):

23.9 Conformance/approvals

This product is compliant or approved to the following standards or by the
listed entities.
• Radio Equipment Directive 2014/53/EU
• EN 60945:2002 (Europe, Australia New Zealand)
Range
0.6 m (2 ft) to 366 m (1,200 ft)
0.6 m (2 ft) to 183 m (600 ft)
0.6 m (2 ft) to 91 m (300 ft)
0.6 M (2 ft) to 91 m (300 ft)
Range
0.9 m (3 ft) to 1,524 m (5,000 ft) (in
optimum conditions, using a 1 kW
transducer)
Range
0.6 m (2 ft) to 274 m (900 ft),
depending on water conditions
105