Internal Gnss (Gps) Receiver Specification; Connections Specification - Raymarine AXIOM 2 PRO Installation Instructions Manual

21.5 Internal GNSS (GPS) receiver specification

Specification
Almanac Update:
Antenna:
Channels:
Cold start (Time To First
Fix):
Geodetic Datum:
GNSS compatibility:
Operating frequency:
Position Accuracy:
Receiver IC Sensitivity:
Refresh Rate:
SBAS compatibility:
Signal Acquisition:
94
Automatic
Internal antenna, optional external antenna
connection.
Track up to 28 satellites simultaneously.
<2 minutes.
WGS-84 (alternatives can be selected on
the display)
• GPS
• GLONASS
• Beidou
• Galileo
1574 MHz to 1605 MHz.
• Without SBAS: <= 15 meters 95% of the
time.
• With SBAS: <= 5 meters 95% of the time.
• 165 dBm (Tracking)
• 160 dBm (Re-acquisition)
• 148 dBm (Cold start)
10 Hz (10 times per second)
• EGNOS
• GAGAN
• MSAS
• QZSS
• WAAS
Automatic

21.6 Connections specification

Specification
Accessory connection:
Analog video connections:
Audio connections:
Ethernet connections:
GPS antenna connection:
HDMI connections:
NMEA 0183 connection:
NMEA 2000 connection:
Bluetooth connection:
Wi-Fi connection:
USB Micro B (for external card reader
connection).
Composite BNC connectors via
Power/Video/Audio cable.
Left and Right RCA connectors via
Power/Video/Audio cable.
RayNet (10/100/1,000 Mbits/s) x 2.
TNC type connector.
Micro HDMI (Type D) (v1.4b) output
connector.
NMEA 0183 TO NMEA 2000 convertor
required (part number: A80721).
DeviceNet connector (Load Equivalency
Number = 1).
Bluetooth: v4.0 combined with Wi-Fi
module.
Multiband - 2.4GHz, and 5Ghz 802.11b/g/n
• Dual MIMO (Multiple In, Multiple Out) @
2.4 GHz
– 1x Antenna is used for Wi-Fi only
– 1x Antenna is used for both Wi-Fi and
Bluetooth
2.4GHz only (can simultaneously operate as
an access point and as a host)
• SISO (Single In, Single Out) @ 5 GHz
– 1x Antenna is used for Wi-Fi only
– 1x Antenna is used for Bluetooth only