Sonar Check - Raymarine E90W Installation Instructions Manual

5.5 Sonar check

Warning: Sonar operation
• NEVER operate the sounder with the boat out of
the water.
• NEVER touch the transducer face when the sounder
is powered on.
• SWITCH OFF the sounder if divers are likely to be
within 25 ft (5 m) of the transducer.
Select the fishfinder transducer
You must set up the system for the transducer connected to your
DSM. Use the fishfinder setup menus to select the appropriate
transducer.
Selecting the fishfinder transducer
From the main fishfinder screen:
1. Press the MENU button.
2. Select Fishfinder Setup from the list of options.
3. Select Transducer Settings from the list of menu options:
4. Use the Select Transducer option and select the appropriate
transducer from those available.
Checking the sonar
Sonar checks are made using the fishfinder application.
1. Select the fishfinder page.
58
2. Check the fishfinder display.
With the fishfinder active you should see:
• Depth reading (indicates the transducer is working). The
depth is shown in large white numbers at the bottom left of
the screen.
E-Series Widescreen installation