Table of Contents
Advertisement
Dimensional drawings
Dimensions for installation of ET200iSP
①
Power supply (PS)
terminal module
②
IM/EM terminal module with IM component
(IM = interface module, EM = electronic module)
③
EM/EM terminal module with I/O component
(I/O = input/output)
④
Termination module
⑤
Mounting rail
Figure 10-1
Dimensional drawing of wall-mounted enclosure 6DL2804-0xD...Gxx with installation of ET200 iSP components
Wall-mount enclosure 6DL2804-0xxxx
Hardware Installation Manual, 08/2022, A5E42024593-AB
⑥
Equipotential bonding rail with terminals
⑦
Cable entry for signal lines M16 (4 to 9 mm) or
M20 (6 to 13 mm)
⑧
Cable and wiring entry for PROFIBUS M20
⑨
Screw gland for pressure/climate compensation
⑩
Cable and wiring entry for power supply M32 (13 to 21 mm)
10
33
Advertisement
Table of Contents
