Measures - Siemens SIMATIC 6DL2804-0 D Series Installation Manual

Distributed i/o wall-mount enclosure
Hide thumbs Also See for SIMATIC 6DL2804-0 D Series:
Table of Contents

Advertisement

2.4

Measures

In the interest of safety, observe the following precautionary measures:
Type of protection "Flameproof enclosure d"
Devices with "pressure-resistant encapsulation" protection may only be opened when the
power has been disconnected.
Type of protection "Intrinsic safety i"
"Intrinsically-safe" devices lose their certification as soon as they are operated on circuits which
do not correspond with the test certification valid in your country.
Type of protection "Increased safety e"
Devices with the type of protection "Increased safety" must not produce sparks or electric arcs
during operation under normal conditions. Electrical equipment and parts must not exceed a
rated voltage of 11 kV.
Type of protection "Mold encapsulation m"
Devices with the type of protection "Mold encapsulation" are potted in casting compound.
Type of protection "By means of enclosure t"
Devices with the type of protection "By means of enclosure" prevent the penetration of dust or
reduce it to a harmless level. Explosive equipment can be installed. The temperature on the
housing must not ignite the surrounding atmosphere.
Use in environments with aggressive and dangerous media
The device can be operated both at high pressure and with aggressive and hazardous media.
Therefore, improper use of this device may lead to serious injury and or considerable damage
to property. Above all, it must be noted when the device was in use and is to be exchanged.
Electrostatic sensitive devices
This device contains electrostatic sensitive devices. ESD devices can be destroyed by voltages
well below the threshold of human perception. These static voltages develop when you touch
a component or electrical connection of a device without having discharged the static charges
present on your body. The damage to a module as a result of overvoltage cannot usually be
detected immediately. It may only become apparent after a long period of operation.
Wall-mount enclosure 6DL2804-0xxxx
Hardware Installation Manual, 08/2022, A5E42024593-AB
WARNING
WARNING
CAUTION
Safety information
2.4 Measures
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic 6dl2804-0 e series

Table of Contents