Paper Feeds At A Slant - Epson ET-18100 Series User Manual

Solving Problems
The installation location is inappropriate.
Solutions
Place the printer on a flat surface and operate in the recommended environmental conditions.
"Environmental Specifications" on page 154
&
Unsupported paper is being used.
Solutions
Use paper supported by this printer.
"Available Paper and Capacities" on page 142
&
"Unavailable Paper Types" on page 144
&
Paper handling is inappropriate.
Solutions
Follow paper handling precautions.
"Paper Handling Precautions" on page 25
&
Too many sheets are loaded in the printer.
Solutions
Do not load more than the maximum number of sheets specified for the paper.
"Available Paper and Capacities" on page 142
&
Paper slips when paper dust adheres to the roller.
Solutions
If the paper you have been using until now does not feed properly, paper dust may be stuck to the roller.
Clean the roller.
If paper does not feed even after cleaning the roller, replace the roller.
"Cleaning the Paper Path for Paper Feeding Problems" on page 59
&
"It is Time to Replace the Pickup Rollers" on page 132
&

Paper Feeds at a Slant

The following causes can be considered.
The paper is loaded incorrectly.
Solutions
Load paper in the correct direction, and slide the edge guide against the edge of the paper.
"Loading Paper in the Rear Paper Feeder" on page 27
&
>
Paper Does Not Feed Properly
107