Paper Does Not Feed Correctly; Paper Jams; Paper Feeds At A Slant; Several Sheets Of Paper Are Fed At A Time - Epson XP-2150 Series User Manual

Solving Problems

Paper Does Not Feed Correctly

Check the following points, and then take the appropriate actions to solve the problem.
❏ Place the printer on a flat surface and operate in the recommended environmental conditions.
❏ Use paper supported by this printer.
❏ Follow the paper handling precautions.
❏ Do not load more than the maximum number of sheets specified for the paper. For plain paper, do not load
above the line indicated by the triangle symbol on the edge guide.
Related Information
"Environmental Specifications" on page 149
&
"Paper Handling Precautions" on page 35
&
"Available Paper and Capacities" on page 36
&

Paper Jams

❏ Load paper in the correct direction, and slide the edge guides against the edges of the paper.
❏ Load one sheet of paper at a time if you have loaded several sheets of paper.
Related Information
"Removing Jammed Paper" on page 118
&
"Loading Paper in the Rear Paper Feed" on page 38
&

Paper Feeds at a Slant

Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
"Loading Paper in the Rear Paper Feed" on page 38
&

Several Sheets of Paper are Fed at a Time

❏ Load one sheet of paper at a time.
❏ When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is
loaded in the printer before you reload the paper.
>
Paper Does Not Feed Correctly
>
Several Sheets of Paper are Fed at a Time
121