Nortel Contivity 2600 Getting Started page 59

7 Click Synchronize to immediately synchronize the primary and secondary
disks. Thereafter, the disks will automatically synchronize every hour.
8
Upgrade the system boot software by clicking the drop-down list box to select
a drive onto which you want to update the system boot software. Click
Upgrade to rewrite the boot software onto the hard disk. You would do this if
the system boot sector were to become corrupted.
9
Restart the system by removing the diskette and pressing the Reset button on
the back of the Switch. Then reposition your Web browser to the Management
IP address, and press "Reload" or "Refresh" from your browser menu to
access the management page of the software running on the hard disk.
Chapter 5 Using the Recovery Diskette 59
Getting Started with the Contivity Extranet Switch 2600