5. Starting Web Management
The following shows how to start up the Web Management of the L3 Managed
Switch. Note the L3 Managed Switch is configured through an Ethernet connection.
Please make sure the manager PC must be set to the same IP subnet address.
For example, the default IP address of the L3 Managed Switch is 192.168.0.100,
then the manager PC should be set to 192.168.0.x (where x is a number between
1 and 254, except 100), and the default subnet mask is 255.255.255.0.
Managed Switch
IP Address: 192.168.0.100
5.1 Logging in to the L3 Managed Switch
1. Use Internet Explorer 8.0 or above Web browser and enter IP address
http://192.168.0.100 (the factory default IP address or the one that you have
just changed in console) to access the Web interface.
RJ45/UTP Cable
Figure 5-1: IP Management Diagram
PC / Workstation with Web Browser
192.168.0.x
11