Table of Contents
Advertisement
4.3 Storing Current Switch Configuration
In the L3 Managed Switch, the running configuration sequence running-config
can be saved from the RAM to FLASH by "copy" command, so that the running
configuration sequence becomes the start-up configuration file, which is called
configuration save.
At the "#" prompt, enter the following command and press <Enter>.
# copy running-config startup-config
Figure 4-6: Saving Current Configuration Command Screen
If you are not familiar with the console command or the related
parameter, enter "help" anytime in console to get the help
description.
Note
10
Advertisement
Table of Contents
