Network Setup - NEC 338 Product Manual

Network setup

(Select Network setup or press 7 on User settings menu screen)
Network setup settings allows you to change various settings related to the mobile phone network:
Item
Network select
Pref.networks
Network mode
Select APN
Description
Selects the network operator (Public Land Mobile Network, PLMN) automatically/
manually.
When Automatic is selected, 338 automatically searches and selects PLMN in
order of priority.
When Manual is selected, a list of valid PLMNs is displayed. Select a PLMN from
the list. Your 338 establishes a connection to that PLMN. If this connection is
unsuccessful, a message requesting another selection is displayed.
Displays the list of PLMNs saved in the USIM card, updates the PLMN list, adds
and deletes PLMN entries and changes the search priority and the entry display
order. USIM list can contain up to 50 PLMN entries. Add, Sort, Replace and Delete
are provided under the Options menu.
To change the search priority and the entry display order:
Press the SK1 (Move) on PLMN List. On PLMN Priority, select the PLMN to
move, move the cursor to destination and press the Enter or the SK1.
Selects the mode of operation for the 338:
Automatic: 338 automatically selects the available service.
3G only: The service area is manually set only to the 3G coverage.
It is possible to switch from Automatic mode to 3G only mode by holding and
pressing the when in 2G/2.5G coverage. The user will need to reselect
Automatic through the Network setup menu if this is the preferred setting.
Selects and edits the Access Point Name (APN) for Always-on connection.
-67-
Changing the Settings on your 338