NEC 338 Product Manual page 59

To
6 Send the email
Useful Tips
The availability of each function is shown by the following abbreviations:
T: Text message
M: Multimedia message
E: Email, EP is POP3 only and EI is IMAP4 only
Task
Setting the addressee from the
contact entries (Handset
contacts)
Sending messages manually
Previewing a message before
sending
Changing the message type
Clearing the subject/address/
text/attachment
Saving an unfinished and
unsent message
Using Messaging
Do this
Press the SK1 (Send). Your message is sent according to how you have
already set the following settings:
•
Send immediately for Message send timing under the Send
options
The email is sent and saved in the Sent folder.
•
Send later for Message send timing under the Send options
The email is stored in the Outbox until the next time you send
the message manually. Refer to Sending messages manually
on page 46 for details.
Steps
Press the SK2 (Find) on the addressee entry box and select the
addressee's phone number/email address.
The selected phone number/email address is transferred in to To.
Press the Options menu key on the New/Edit message screen
and select Send all and press the Enter key.
Press the Options menu key on the New/Edit message screen
and select Preview message.
For multimedia messages, pressing the SK2 (Preview) on
the Composer screen also displays the preview.
Select the message type field, press the Enter key and select the
message type.
Press the Options menu key and select Clear fields. Select the
field to clear from Clear all fields, Clear subject (not available for
text messages), Clear address, Clear text or Clear attachment.
Press the SK2 (Save). The message is saved in Drafts.
-46-
Available
for
T M E
E
T M E
T M E
(T) M E
T M E