To Start/Switch Tasks During Multitasking; High-Speed Data Communications - NEC 338 Product Manual

To Start/Switch Tasks During Multitasking

To
1 Go back to the Home screen
2 Start another task
3 Switch to another task
4 End tasks

High-Speed Data Communications

Your 338 supports high-speed data communication rates for your PC via a USB connection. PC Connection requires 338 PC
Synchronisation and File Transfer software, as well as a USB data cable (available as an accessory). To install the software,
attach the USB cable between your 338 and a PC, and install the 338 USB driver from the "Utilities/Tools" section of your
338 CD-ROM (also available as an accessory). Then to discover how this technology can be used with your 338, please
refer to Connections section on page 100.
The ability to use your 338 as a modem to access the Internet is an operator-dependent service. Please check with 3 to
ensure that this service is available.
A dial-up connection is possible in 3G as well as 2G coverage. However, the speed of communication is faster in 3G
coverage. Please check with 3 to ensure this service is available.
Do this
Press the End key.
Enter the phone number to make a call.
Press the MENU key and select Messages to start messaging.
Press the SK2 (Contact) to start the contact list function.
Press the to access 3 multimedia services.
Press the MENU key to display Main Menu.
Press and hold the MENU key.
The taskbar is displayed.
Select the required task by pressing Left and Right keys and the Enter
key to switch to the selected task.
End a task: Select the icon on the taskbar to end and press SK1 (End
task).
End all tasks: Press SK2 (End all).
When only the Home screen icon is displayed, no tasks are active.
Press the End key to end multi-tasking.
-77-
Using your 338's Advanced Features