Disassembly Procedure - Panasonic Lumix DMC-FX700P Service Manual

8.3.

Disassembly Procedure

No. Item
1 Rear Case Unit
Front Case Unit
2 Sub Operation FPC
Unit/PCB Frame
3 LCD Unit
4 Top Operation Unit
5 Flash Top P.C.B.
Speaker
6 Lens Unit
7 Main P.C.B.
8 Sub Operation FPC
Unit
9 Battery Case
10 Battery Door Unit
Fig Removal
(Fig. D1) Card
Battery
6 Screws (A)
Side Ornament R
(Fig. D2) 2 Locking tabs
2 Hanging parts
Rear Case Unit
1 Locking tab
Front Case Unit
(Fig. D3) FP9501(Flex)
FP9502(Flex)
2 Locking tabs
3 Ribs
FP9003(Flex)
Sub Operation FPC Unit/
PCB Frame
(Fig. D4) 1 Screw (B)
3 Hanging parts
FP9004(Flex)
LCD Unit
(Fig. D5) 3 Screws (C)
Frame Plate Unit
Tripod
PS8001(Connector)
Side Ornament L
Top Operation Unit
(Fig. D6) 2 Locking tabs
AF Panel Light
FP8001(Flex)
2 Screws (D)
3 Locking tabs
MIC Unit
Power Knob Guide
Power Knob
Flash Top P.C.B.
Speaker
(Fig. D7) Discharge of the capacitor
NOTE: (When Installing)
(Fig. D8) FP9002(Flex)
FP9005(Flex)
Lens Unit
(Fig. D9) 1 Screw (E)
Sheet
1 Locking tab
Main P.C.B.
(Fig. D10) 4 Locking tabs
REC/PLAYBACK Selector
Knob
2 Pins
4 Projection parts
Sub Operation FPC Unit
(Fig. D11) 2 Ribs
Strap Holder
3 Locking tabs
Battery Out Spring
Battery Case
(Fig. D12) Battery Door Shaft
Battery Door Spring
Battery Door Unit
8.3.1. Removal of the Rear Case Unit and
Front Case Unit
24
(Fig. D1)