When Replacing The Main P.c.b; Service Position - Panasonic Lumix DMC-FX700P Service Manual

7.2.

When Replacing the Main P.C.B.

After replacing the MAIN P.C.B., be sure to achieve adjustment.
The service software is available at "TSN Website". To download, click on "Support Information from NWBG/VDBG-AVC".
7.3.

Service Position

This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
No. Parts No.
1 RFKZ0477
2 VFK1951
3 RFKZ0545
4 VFK1974
CAUTION-1. (When servicing FLASH TOP P.C.B.)
1. Be sure to discharge the E.capacitor on FLASH TOP P.C.B..
Refer to "HOW TO DISCHARGE THE E.CAPACITOR ON FLASH TOP P.C.B.".
The E.capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on FLASH TOP P.C.B..
3. DO NOT allow other parts to touch the high voltage circuit on FLASH TOP P.C.B..
Table S1 Extension Cable List
Connection
FP9005 (MAIN) - LENS UNIT
FP9004 (MAIN) - LCD UNIT
PP9001 (MAIN) - PS8001 (FLASH TOP)
FP9501 (SUB OPERATION FPC UNIT) - LCD UNIT
22
Form
45PIN 0.3 FFC
39PIN 0.3 FFC
34PIN B to B
4PIN 0.5 FFC