card which has a few photo data.
- Step 2. Confirm the version:
Set the mode dial to " [Playback] ".
Press [Flash] and " [DOWN] of Cross key" simultaneously. (No
need to keep pressing.)
(The version information is displayed on the LCD with red colour
letters.)
<Point>
- The firmware version and EEPROM version can be confirmed with
the information (1).
- The information (2)-(4) are just reference.
<NOTE>
The Sub-uCOM version (stored in IC9201: Masked type) is not rewrite-able.
12. DISASSEMBLY PROCEDURE
12.1. DISASSEMBLY FLOW CHART
19