5. Configuring the LAN Settings of the PC
13
Click [Use the following IP address], and input [IP address] and [Subnet mask].
• For example, if the [IP address] and [Subnet mask] of the projector are set as show in "Example
of projector settings" on page 30, configure the personal computer as shown below.
• Example IP address and subnet mask settings.
IP Address
Subnet Mask
13
Click
-1
14
Click [OK].
The "Wireless Network Connection Properties" window is displayed.
15
Click [Close].
The "Wireless Network Connection Status" window is displayed.
16
Click [Close].
The "Network and Sharing Center" window is displayed.
17
Click the [X] in the top-right corner of the window.
The window will close.
This completes the configuration of a wireless LAN Ad Hoc connection on the personal computer
(Windows Vista).
The contents of the PC screen can now be transmitted to the projector using each of the programs
in User Supportware 6.
Projector (
page 30)
192.168.100.10
255.255.255.0
([Example] Wireless LAN in Windows Vista: Ad Hoc connection)
Personal computer (Screen Below)
192.168.100.30
255.255.255.0
13
14
Click
Click
-2
33
5