NEC NP1250 Network Setup Manual page 25

13
Select "SECURITY" page (if necessary).
17
Proceed to step
SELECT /
<1> Use the
button to highlight the "SECURITY" tab.
The "SECURITY" page is displayed.
14
Select "SECURITY TYPE".
Selects whether or not to use security settings.
To use security settings, select the "SECURITY TYPE".
DISABLE
WEP(64BIT)
WEP(128BIT)
WPA-PSK/WPA-EAP/
WPA2-PSK/WPA2-EAP
15
Select "KEY SELECT" (only when WEP is selected).
If "WEP (64BIT)" or "WEP (128BIT)" is selected from "SECURITY TYPE", select which of the following
encryption keys, "KEY 1" to "KEY 4", is to be used.
4. Configuring the LAN Settings of the Projector
if WEP, WPA-PSK, WPA-EAP, WPA2-PSK, or WPA2-EAP is not set.
button to select the "CONNECTION" tab, and press the
Encryption is not performed. There is a risk of transmitted data being
intercepted by a third party.
Encryption is performed using WEP with a 64-bit long secret key.
Encryption is performed using WEP with a 128-bit long secret key. This
offers enhanced security when compared to a 64-bit secret key.
More secure than WEP type. For setting details, refer to "WPA Setting Guide"
on the User's Manual CD-ROM.
4
25