NEC NP1250 Network Setup Manual page 22

4. Configuring the LAN Settings of the Projector
5
Input "SUBNET MASK".
If "DHCP" is not checked, input the subnet mask of the network to which the projector is connected.
The method of inputting is the same as that of the "IP ADDRESS" field.
6
Input "GATEWAY".
If "DHCP" is not checked, input the default gateway of the network to which the projector is connected.
The method of inputting is the same as that of the "IP ADDRESS" field.
7
Input "DNS CONFIGURATION".
Set the IP address of the DNS server of the network to which the projector is connected.
The method of inputting is the same as that of the "IP ADDRESS" field.
Example of setting 1
Reference
Configure the [WINS CONFIGURATION] when connecting to a shared folder outside of
the subnet using the viewer function.
To configure, input the IP address of the WINS server for the network to which the
projector will connect. The input method is the same as the [IP ADDRESS] field. If the
[DHCP] field is checked, this is configured automatically by the DHCP server.
Ask your network administrator for details.
8
Select "ADVANCED".
Set "CONNECTION" and "SECURITY" (encryption) specific to wireless LAN.
SELECT /
<1> Use the
the
22
button to highlight "ADVANCED" on the "WIRELESS" page and press
button.