NEC NP1250 Network Setup Manual page 29

n Setting Wired LAN
1
Display the "WIRED" page of "NETWORK SETTINGS".
Configure the setting of wired LAN in the "WIRED" page of "NETWORK SETTINGS" selected from
On-Screen Menu. If "NETWORK SETTINGS" is not displayed, refer to "4-1. Displaying On-Screen
Menu (NETWORK SETTINGS)" (
2
Select "PROFILES".
"PROFILE 1" or "PROFILE 2" can be stored in the memory of the projector as the setting of LAN.
SELECT 
<1> Press the
button.
SELECT /
<2> Use the
button.
3
Set "DHCP".
Follow the same procedure as in "4-2. Wireless LAN" (
4
Input "IP ADDRESS", "SUBNET MASK", and "GATEWAY".
Follow the same procedure as in "4-2. Wireless LAN" (
5
Input "DNS CONFIGURATION".
Follow the same procedure as in "4-2. Wireless LAN" (
6
Reconnect to the network.
<1> When all the above items have been input or set, use the
"RECONNECT" and press the
7
Confirm the settings.
SELECT /
<1> Use the
The setting is stored in the memory of the projector.
4. Configuring the LAN Settings of the Projector
page 17).
button once to highlight the "PROFILES" field and press the
button to highlight "PROFILE 1" or "PROFILE 2", and press the
button.
button to highlight [OK] and press the
page 19).
page 19, 20).
page 20).
SELECT /
button to highlight
button.
4
29