NEC NP1250 Network Setup Manual page 24

4. Configuring the LAN Settings of the Projector
10
Input or edit "SSID" (if necessary).
SSID selected in "SITE SURVEY" are automatically input.
If the highlight is moved to the "SSID" field and the
is displayed and characters can be input or edited.
The default setting of the projectors is "NECPJ".
11
Select "NETWORK TYPE" (if necessary).
The communication mode of the SSID selected in "SITE SURVEY" is automatically selected.
The settings can be changed by moving the highlight to the "NETWORK TYPE" field and pressing
the
• "INFRASTRUCTURE" ...This is selected if communication is performed with two or more devices
• "AD HOC" ......................This is selected when using the wireless LAN to directly communicate
Example of connection when
"NETWORK TYPE" is "INFRASTRUCTURE"
Wireless
Access
point
Wired LAN
Example of setting 2
12
Select "CHANNEL" (if necessary).
Select a channel for communication using wireless LAN.
If neighboring channel numbers are used in one area, the speed of wireless LAN communication
decelerates. To avoid such a situation, select channel numbers that are widely separated.
The factory default setting is "AUTOMATIC".
24
button.
connected by wired or wireless LAN via a wireless access point.
without a wireless access point.
button is pressed, a software keyboard
Example of connection when
"NETWORK TYPE" is "AD HOC"