Wireless Lan - NEC NP1250 Network Setup Manual

4-2. Wireless LAN

When connecting the wireless LAN, configure the LAN settings in the "WIRELESS" page of
"NETWORK SETTINGS" selected from On-Screen Menu.
Note
The wireless LAN cannot be used with VT800.
n Configuration flowchart
1
Step Display "WIRELESS" page of "NETWORK SETTINGS".
2
Step Select "PROFILES".
3
Step Enable or disable "DHCP".
If "Disabled" (without check mark)
4
Step Input "IP ADDRESS".
5
Step Input "SUBNET MASK".
6
Step Input "GATEWAY".
7
Step Input "DNS CONFIGURATION".
8 16
Step - Setting of "ADVANCED".
8
Setting of "CONNECTION".
9
Select SSID in "SITE SURVEY".
10
Input "SSID" (if necessary).
11
Select "NETWORK TYPE" (if necessary).
12
Select "CHANNEL" (if necessary).
4. Configuring the LAN Settings of the Projector
17
Step Confirm the "ADVANCED" settings.
18
Step Reconnect to the network.
19
Step Confirm the settings.
If "Enabled" (with check mark)
If "EASY CONNECTION" is selected
13
Setting of "SECURITY"
14
Select "SECURITY TYPE".
15
Select "KEY SELECT".
16
Set "KEY 1 to KEY 4".
4
19