Configuring The Lan Settings Of The Pc ([Example] Wireless Lan In Windows Vista: Ad Hoc Connection) - NEC NP1250 Network Setup Manual

5. Configuring the LAN Settings of the PC
5. Configuring the LAN Settings of the PC
([Example] Wireless LAN in Windows Vista: Ad Hoc connection)
This section explains the procedure for Ad Hoc connection of wireless LAN between the
personal computer and projector, by using the wireless network setting function with Windows
Vista Ultimate.
Preparation:
• If the computer you are using does not have a built-in wireless LAN unit, install a
commercially available wireless LAN card driver to your personal computer, and complete
setup of the wireless LAN card. For details on how to install the driver, refer to the User's
Manual of the wireless LAN card.
• Check the display of the Windows Vista taskbar. If a network connection utility dedicated
to a wireless LAN unit or a wireless LAN card is running, terminate that utility.
• Configure the wireless LAN settings of the projector. For details, refer to "4. Setting the
LAN Settings of Projector" (
This section provides an example for when the projector is configured with the following
wireless LAN settings.
[Example of projector settings]
1
Click Windows [Start] → [Control Panel].
The "Control Panel" window is displayed.
2
Click the [View network status and tasks] link that is displayed under
[Network and Internet].
30
page 15).
Item
IP Address
Subnet Mask
SSID
NETWORK TYPE
WEP
KEY SELECT
KEY 1
([Example] Wireless LAN in Windows Vista: Ad Hoc connection)
Setting
192.168.100.10
255.255.255.0
NECPJ
AD HOC
64bit
KEY1
NECDS