Troubleshooting - Panasonic WX-CR480P Operating Instructions Manual

Troubleshooting

Please check the common problems listed in this table before seeking professional
help.
If none of the tips provided here help, if you are dealing with a problem not listed here, or if
you are otherwise uncertain, contact your retailer for more information.
Phenomenon
The [STATUS]
indicator stays off
The [STATUS]
indicator lights red
The [STATUS]
indicator blinks red
The [STATUS]
indicator blinks orange
or green
28
WX-CR480P_PUQX1029ZAV1_OI_en-fr.indb
Cause/measure
● Is the repeater being powered?
¨ Make sure that the repeater is connected to
¨
the USB power adaptor.
● A communication error with the center module
has occurred.
¨ Register the ID of the repeater on the center
¨
module.
● Repeater registration has failed.
¨ Confirm that the center module is in repeater
¨
registration mode, then press and hold the
[ID REG] button on the repeater to register
the ID.
● Immediately after turning on the power of the
repeater
Searching for the center module.
¨ Wait until the repeater connects with the
¨
center module.
● If a repeater is operating
The signal reception from the center module is
poor.
¨ Check whether there are increased obstacles
¨
between the repeater and the center module.
If the situation does not improve, consider
changing the location for installing the
repeater.
28
Reference
page
24
15, 25
15, 25
15, 19
2021/11/08 13:25:17